Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 591

RPD_LMP_PEER_IFL
System Log Message
Description
Type
Severity
Facility
RPD_LMP_PEER_INDEX
System Log Message
Description
Type
Severity
Facility
RPD_LMP_RESOURCE
System Log Message
Description
Type
Severity
Facility
RPD_LMP_RESOURCE_NO_LINK
System Log Message
Description
Type
Severity
Facility
RPD_LMP_SEND
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
operation operation failed because reason for peer peer-name (index peer-id):
error-message (errno error-code)
The routing protocol process (rpd) could not perform the indicated operation for the
peer with the indicated name and index, for the indicated reason.
Error: An error occurred
error
LOG_DAEMON
No more peer indexes
No more peer indexes were available for allocation.
Event: This message reports an event, not an error
error
LOG_DAEMON
operation operation failed: resource resource (type type, index index) reason
The routing protocol process (rpd) could not perform the indicated operation for the
resource with the indicated name, type, and index, for the indicated reason.
Error: An error occurred
error
LOG_DAEMON
TE link link-id not found for resource resource (type type, index index)
The routing protocol process (rpd) could not locate the indicated traffic-engineering link
for the resource with the indicated name, type, and index.
Error: An error occurred
error
LOG_DAEMON
function-name: handling write exception (error-message, errno error-code)
The routing protocol process (rpd) could not send a message to the Label Management
Protocol (LMP) process (lmpd).
Chapter 73: RPD System Log Messages
527