Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 268

Junos 10.3 System Log Messages Reference
Facility
CHASSISD_SNMP_TRAP10
System Log Message
Description
Type
Severity
Facility
CHASSISD_SNMP_TRAP6
System Log Message
Description
Type
Severity
Facility
CHASSISD_SNMP_TRAP7
System Log Message
Description
Type
Severity
Facility
CHASSISD_SPI_IOCTL_FAILURE
System Log Message
Description
Type
Severity
Facility
204
LOG_DAEMON
SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6, argument7 value7, argument8
value8, argument9 value9, argument10 value10)
The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the ten indicated argument-value pairs.
Event: This message reports an event, not an error
notice
LOG_DAEMON
SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6)
The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the six indicated argument-value pairs.
Event: This message reports an event, not an error
notice
LOG_DAEMON
SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6, argument7 value7)
The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the seven indicated argument-value pairs.
Event: This message reports an event, not an error
notice
LOG_DAEMON
function-name: reason 0xaddress, error error-message
The chassis process (chassisd) could not perform the indicated ioctl() operation on the
indicated register of the spi device.
Error: An error occurred
error
LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.