Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 353

Type
Severity
Facility
FWAUTH_TELNET_USER_AUTH_FAIL
System Log Message
Description
Type
Severity
Facility
FWAUTH_WEBAUTH_FAIL
System Log Message
Description
Type
Severity
Facility
FWAUTH_WEBAUTH_SUCCESS
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
info
LOG_PFE
User username at client-address is rejected.
User authentication failed because the username or password was invalid.
Event: This message reports an event, not an error
info
LOG_PFE
WebAuth user username at client-address is rejected/timed out.
The provided user credentials are not valid.
Event: This message reports an event, not an error
info
LOG_PFE
WebAuth user username of group group-name at client-address is accepted.
The authenticated user can start accessing protected resources.
Event: This message reports an event, not an error
info
LOG_PFE
Chapter 33: FWAUTH System Log Messages
289