Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 509

Severity
Facility
Cause
Action
MIB2D_IF_FLAPPING_MISSING
System Log Message
Description
Type
Severity
Facility
MIB2D_KVM_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
MIB2D_PMON_OVERLOAD_CLEARED_TRAP
System Log Message
Description
Type
Severity
Facility
MIB2D_PMON_OVERLOAD_SET_TRAP
System Log Message
Copyright © 2010, Juniper Networks, Inc.
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
function-name: interface flapping missing: ifname(interface-name) old
if_anydown_flaps(old-value) if_anydown_flaps(new-value)
The MIB II process (mib2d) is blocked on the kernel for synchronous message. If there is
an interface flap (down and then back up again) in the time mib2d is blocked in the kernel,
mib2d will miss asychronous messages from the kernel about state changes.
Event: This message reports an event, not an error
notice
LOG_DAEMON
function-name: reason: error-message
A call to the indicated function in the kernel virtual memory library failed.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Overload name: overload-name, interface: interface-name
The MIB II process (mib2d) generated a jnxPMonOverloadCleared trap when it detected
the clearing of an overload condition on the indicated monitoring services interface.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Overload name: overload-name, interface: interface-name
Chapter 59: MIB2D System Log Messages
445