Chapter 84 Ssh System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 84
SSH System Log Messages
SSH_RELAY_CONNECT_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
SSH_RELAY_SERVER_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
Action
SSH_RELAY_USAGE
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
process (ssh).
Unable to connect to service-name server: error-message
The 'ssh-relay' program could not connect to the server process for the indicated service.
Error: An error occurred
error
ANY
The server process is not running or has not enabled the service.
SSH relay error for service-name service: error-message
The indicated error occurred when a JUNOS process tried to establish secure shell (SSH)
relay during initialization of the indicated service.
Error: An error occurred
error
ANY
An internal software failure occurred.
Contact your technical support representative.
Usage: ssh-relay -s service-name
The syntax statement for the 'ssh-relay' command was displayed because the command
was invoked with one or more incorrect options, or without necessary options.
prefix. They are generated by the ssh-relay
SSH
617