Chapter 86 Task System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 86
TASK System Log Messages
TASK_ABORT
System Log Message
Description
Type
Severity
Facility
Action
Cause
TASK_ACTIVE_TERMINATE
System Log Message
Description
Type
Severity
Facility
TASK_ASSERT
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
abort executable-name[pid] version version built by builder on date: error-message
The control protocol process terminated because of an internal error.
Error: An error occurred
error
ANY
Examine the messages that immediately follow this message in the system log for
information about possible causes.
An internal software failure occurred.
Exiting with active tasks: task-name
After receiving multiple termination requests, the control protocol process exited without
performing the indicated cleanup tasks.
Event: This message reports an event, not an error
notice
ANY
Assertion failed executable-name[pid]: file "source-filename", line line-number: "message"
The source code for this process includes internal self-consistency checks. The process
terminated because a check failed, creating a diagnostic core dump for analysis by
technical support personnel and noting the number of the line in the source file where
the check failed.
Error: An error occurred
prefix.
TASK
621