Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 213

Facility
CHASSISD_FCHIP_INIT_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_FCHIP_LINK_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FCHIP_MONITOR_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FCHIP_PIO_READ_ERROR
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
LOG_DAEMON
Fchips were not configured yet
The chassis process (chassisd) detected that F chips were not yet initialized.
Error: An error occurred
error
LOG_DAEMON
SIBsib-slot_F0: link-type link link-id was bad
The chassis process (chassisd) detected an error for the indicated high-speed receiver
(HSR) or high-speed transmitter (HST) link for an F chip on the indicated Switch Interface
Board (SIB).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
F chip module was invalid
The chassis process (chassisd) detected an invalid F-chip module while enabling or
disabling the monitoring of F-chip functional blocks.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Fchip fchip-id: read error in function-name() for link#link-id, at address address in register
register
The indicated routine failed with a read error at the indicated address and register for
the indicated F chip and link.
Error: An error occurred
error
Chapter 18: CHASSISD System Log Messages
149