Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 632

Junos 10.3 System Log Messages Reference
RPD_TASK_REINIT
System Log Message
Description
Type
Severity
Facility
RPD_TASK_SIGNALIGNORE
System Log Message
Description
Type
Severity
Facility
RPD_TRACE_FAILED
System Log Message
Description
Type
Severity
Facility
RPD_VPLS_INTF_NOT_IN_SITE
System Log Message
Description
Type
Severity
Facility
Action
568
Reinitializing
The routing protocol process (rpd) reinitialized.
Event: This message reports an event, not an error
info
LOG_DAEMON
sigaction(SIGsignal-name): error-message
The routing protocol process (rpd) informed the kernel that it wished to ignore the
indicated signal, but the kernel failed to process the request.
Error: An error occurred
error
LOG_DAEMON
Unable to write to trace file filename
The routing protocol process (rpd) could not write to the indicated trace file, and stopped
attempting to do so. The next commit of the configuration database will reenable tracing.
Event: This message reports an event, not an error
error
LOG_DAEMON
Some interfaces of instance instance are not configured under its single site
Some interfaces of the indicated vpls instance have not been configured under the sole
site of the instance.
Event: This message reports an event, not an error
warning
ANY
Configure all interfaces of the instace under its single site.
Copyright © 2010, Juniper Networks, Inc.