Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 127

ALARMD_MGR_CONNECT
System Log Message
Description
Type
Severity
Facility
Action
ALARMD_MULTIPLE_ALARM_BIT_ERROR
System Log Message
Description
Type
Severity
Facility
Action
ALARMD_PIDFILE_OPEN
System Log Message
Description
Type
Severity
Facility
Cause
ALARMD_PIPE_WRITE_ERROR
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
function-name evSelectFD: initial pipe create aborted (errno error-code)
The alarm process (alarmd) could not open a pipe for interprocess communication (IPC).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Multiple alarm bits: 0xalarm-bit
The alarm process (alarmd) expected one alarm bit set for an interface alarm when it
received multiple.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Unable to open PID file 'filename': errno error-code
The alarm process (alarmd) could not open the file where it stores its process ID (PID).
Error: An error occurred
error
LOG_DAEMON
The alarm process (alarmd)might have detected that another alarmd process was
running and tried to read the file so that it could use the PID recorded there when
terminating the other process.
Pipe write error: error-message
The alarm process (alarmd) experienced a fatal error while writing to a pipe.
Error: An error occurred
error
LOG_DAEMON
Chapter 3: ALARMD System Log Messages
63