Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 530

Junos 10.3 System Log Messages Reference
Facility
PFE_SFLOW_HARDWARE_CFG_FAILED
System Log Message
Description
Type
Severity
Facility
PFE_SIP_ADD_PORT_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SIP_DEL_PORT_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SIP_MEM_INIT_FAILED
System Log Message
Description
Type
Severity
Facility
PFE_SIP_REG_HDL_FAIL
System Log Message
Description
Type
Severity
466
ANY
dev = device-id, port = destination-port, hardware error-code = error-code
The sflow configuration for the port could not be programmed in the hardware
Error: An error occurred
error
ANY
Failed to add SIP ALG port to application definition table
Failed to add the SIP port to the application definition table.
Error: An error occurred
error
LOG_PFE
Failed to delete SIP ALG port from application definition table
Failed to remove the SIP port from the application definition table.
Error: An error occurred
error
LOG_PFE
Failed to create memory pool for object-name
Failed to create a memory pool for SIP.
Error: An error occurred
error
LOG_PFE
Failed to register object-name handle
Failed to register the handler with the external module.
Error: An error occurred
error
Copyright © 2010, Juniper Networks, Inc.