Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 725

Type
Severity
Facility
Cause
Action
VCCPD_PROTOCOL_OVERLOAD
System Log Message
Description
Type
Severity
Facility
Cause
Action
VCCPD_SYSTEM
System Log Message
Description
Type
Severity
Facility
Cause
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
warning
LOG_DAEMON
The packet was corrupted in transit between the neighboring switch and this switch, or
memory on one of the switches was corrupted.
None, unless a large number of these messages appear in the system log file. The
corrupted LSP is purged from the virtual chassis and sent again by the originator.
vccpd database overload
The vccpd link-state database is full and no additional memory can be allocated for it.
Error: An error occurred
alert
LOG_DAEMON
No additional memory is available for storing vccpd link-state information. Either system
resources are exhausted or a software error occurred (such as a memory leak).
Perform one or more of the following actions: (1) Check for unusually high memory usage
by vccpd, (2) Add more memory to the switch.
reason: error-message
A system call made by this process failed.
Error: An error occurred
error
LOG_DAEMON
It is possible that the kernel lacked the resources to fulfill the request.
Chapter 90: VCCPD System Log Messages
661