Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 719

Type
Severity
Facility
Cause
Action
UI_SCHEMA_SEQUENCE_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
Action
UI_TACPLUS_ERROR
System Log Message
Description
Type
Severity
Facility
UI_VERSION_FAILED
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
the database understands the data. The value in the database file did not match the
expected value.
Error: An error occurred
error
ANY
The JUNOS software installation did not succeed, possibly because of an internal software
error.
Contact your technical support representative.
Schema sequence number mismatch
The JUNOS user interface schema file records all CLI commands and configuration
statements available in the JUNOS software. The management process (mgd) rebuilds
the schema as necessary to be compatible with the JUNOS software installed on the
routing platform. A sequence number in the schema acts as a checksum that represents
its content and format. A JUNOS process attempted to access the schema but determined
that the schema's sequence number means that it is incompatible with the process.
Error: An error occurred
alert
ANY
An internal software failure occurred.
Contact your technical support representative.
TACACS+ failure: error-message
The management process (mgd) failed to send a record to TACACS+.
Error: An error occurred
notice
LOG_AUTH
Unable to fetch system version: error-message
The management process (mgd) could not retrieve version information from the kernel.
Error: An error occurred
Chapter 88: UI System Log Messages
655