Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 442

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
L2TPD_MLPPP_ID_NODE_ADD_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_MLPPP_ID_ROOT_ALLOC_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_MLPPP_LINK_CREATE_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_MLPPP_LINK_MAX_EXCEEDED
System Log Message
Description
Type
Severity
378
Error: An error occurred
error
LOG_NEWS
Unable to add node for bundle bundle to MLPPP ID map
The Layer 2 Tunneling Protocol process (l2tpd) could not add a node for the indicated
multilink Point-to-Point Protocol (MLPPP) bundle to an MLPPP identifier map data
structure.
Error: An error occurred
error
LOG_NEWS
Unable to allocate root node for MLPPP ID map
The Layer 2 Tunneling Protocol process (l2tpd) could not allocate the root note for a
multilink Point-to-Point Protocol (MLPPP) identifier map data structure.
Error: An error occurred
error
LOG_NEWS
Unable to create MLPPP bundle links (L2TP tunnel tunnel-id, session session-id)
The Layer 2 Tunneling Protocol process (l2tpd) could not create multilink Point-to-Point
Protocol (MLPPP) bundle links for the indicated tunnel and session.
Error: An error occurred
error
LOG_NEWS
Unable to add link: maximum number of sessions exceeded for MLPPP bundle bundle
(L2TP tunnel tunnel-id, session session-id)
The Layer 2 Tunneling Protocol process (l2tpd) could not add a link for the indicated
multilink Point-to-Point Protocol (MLPPP) bundle in the indicated tunnel and session,
because the maximum number of links was exceeded.
Error: An error occurred
error
Copyright © 2010, Juniper Networks, Inc.