BOOTPD_DUP_REV
System Log Message
Description
Type
Severity
Facility
Action
BOOTPD_DUP_SLOT
System Log Message
Description
Type
Severity
Facility
Action
BOOTPD_HWDB_ERROR
System Log Message
Description
Type
Severity
Facility
BOOTPD_MODEL_CHK
System Log Message
Copyright © 2010, Juniper Networks, Inc.
Duplicate revision: major-version.minor-version
As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. There was more than one definition in the file for the
indicated revision of a component, so tnp.bootpd used the first definition it found.
Event: This message reports an event, not an error
notice
ANY
Remove the extra definitions from the configuration file.
Duplicate slot default: slot
As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. There was more than one definition in the file for the
indicated slot (combination of component assembly ID and revision), so tnp.bootpd
used the first definition it found.
Event: This message reports an event, not an error
notice
ANY
Remove the extra definitions from the configuration file.
Operation in chassis hardware database failed: error-message
The boot parameter process (tnp.bootpd) could not complete an operation in the
hardware database maintained by the chassis process (chassisd), for the indicated
reason.
Error: An error occurred
error
ANY
Unexpected ID 0xidentifier for model model
Chapter 16: BOOTPD System Log Messages
125