Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 240

Junos 10.3 System Log Messages Reference
CHASSISD_IFDEV_NO_MEMORY
System Log Message
Description
Type
Severity
Facility
Cause
Action
CHASSISD_IFDEV_RETRY_NOTICE
System Log Message
Description
Type
Severity
Facility
Cause
CHASSISD_IFDEV_RTSLIB_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_IOCTL_FAILURE
System Log Message
176
function-name: unable to allocate memory for interface-type interface
The chassis process (chassisd) could not allocate memory when creating an interface
device for the indicated interface type.
Error: An error occurred
error
LOG_DAEMON
Resources on the system are extremely limited.
Eliminate the resource limitations and restart the PIC that houses the interface for which
the interface device could not be created.
function-name: attempt count to add interface device interface-name failed
(error-message)
The chassis process (chassisd) tried the indicated number of times to create the indicated
interface device, but the attempts failed. After generating this message, the chassisd
process waited a while for resources to free up and tried again.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Necessary resources might have been unavailable. They should become available soon.
function-name: library-function-name failed (error-message)
The chassis process (chassisd) could not create an interface device because an error
occurred during the indicated call to the routing socket library.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: reason for fru-name (error-message)
Copyright © 2010, Juniper Networks, Inc.