Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 529

PFE_SCCP_REG_VSIP_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SCCP_RM_CLIENTID_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SCREEN_MT_CFG_ERROR
System Log Message
Description
Type
Severity
Facility
PFE_SCREEN_MT_CFG_EVENT
System Log Message
Description
Type
Severity
Facility
PFE_SFLOW_CONFIGURATION_FAILED
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Failed to register SCCP client to VoIP State IP port
Failed to register the SCCP client to VoIP State IP port.
Error: An error occurred
error
LOG_PFE
Failed to get SCCP Resource Manager client identifier
Failed to get the SCCP Resource Manager client identifier.
Error: An error occurred
error
LOG_PFE
failed to operation the screen config due to error-message
failed to change the configuration of screen module
Error: An error occurred
error
LOG_PFE
[operation]: screen name - context-name
configuration of screen module is changed
Event: This message reports an event, not an error
info
LOG_PFE
sflow configuration on hardware failed for ifl index = index
The sflow configuration for the ifl index could not be programmed in the hardware
Error: An error occurred
error
Chapter 64: PFE System Log Messages
465