Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 664

Junos 10.3 System Log Messages Reference
SNMPD_AUTH_RESTRICTED_ADDRESS
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_AUTH_WRONG_PDU_TYPE
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_BIND_INFO
System Log Message
Description
Type
Severity
Facility
Cause
Cause
600
function-name: request from address source-address not allowed
The indicated function failed because access requests from the indicated source address
are not allowed.
Error: An error occurred
notice
ANY
An internal software failure occurred.
Contact your technical support representative.
function-name: source-address: unauthorized SNMP PDU type: pdu-type
The indicated function failed because the indicated type of protocol data unit (PDU) is
not supported.
Error: An error occurred
notice
ANY
An internal software failure occurred.
Contact your technical support representative.
Source address for trap socket was set to bind-address
The source address for the indicated type of socket used by the Simple Network
Management Protocol (SNMP) agent process (snmpd) was set to the indicated address.
Event: This message reports an event, not an error
info
LOG_DAEMON
An administrator changed the Junos configuration for the process or for an interface.
The online/offline state changed for a PIC. This can also cause the address to become
newly available or unavailable.
Copyright © 2010, Juniper Networks, Inc.