Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 221

System log messages reference
Table of Contents

Advertisement

Action
CHASSISD_FM_ERROR_SIB_L_FB_HSR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR_SIB_L_FB_RX_VC
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR_SIB_L_FB_SMF
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Contact your technical support representative.
FM: HSR error occurred on link from SIB-S port F(s-row,s-port) to SIB-L#sib-slot port
F(l-row,l-port)
In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the T640 routing nodes (called SIB-Ls)
and the SIBs in the TX Matrix platform (called SIB-Ss). The chassis process (chassisd)
on the routing node that houses the indicated SIB-L detected an error in the electrical
path between the indicated ports on the SIB-L and the corresponding SIB-S.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
error-message on LCC lcc SIB_Lfrom-lcc-sib_FBfiber-bundle VCSEL vcsel Channel
vcsel-channel connected to F13SIBto-sfc-sib
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated ST-SIB-L
detected the indicated error as packets that were traveling in the optical media.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
FM: error-message error occurred on link to-from-sib SIB-L#sib-slot to-from-scc SCC
In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the TX Matrix platform (the switch-card
chassis, or SCC) and the SIBs in the T640 routing nodes (called SIB-Ls). The chassis
process (chassisd) on the routing node that houses the indicated SIB-L detected the
indicated error as packets that were traveling in the indicated direction were translated
between electrical and optical media.
Error: An error occurred
error
Chapter 18: CHASSISD System Log Messages
157

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junos os 10.3 - software

Table of Contents

Save PDF