Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 472

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
Cause
Action
LIBJNX_FILE_COPY_FAILED
System Log Message
Description
Type
Severity
Facility
LIBJNX_FILE_SYSTEM_FAIL
System Log Message
Description
Type
Severity
Facility
LIBJNX_FILE_SYSTEM_SPACE
System Log Message
Description
Type
Severity
Facility
LIBJNX_INVALID_CHASSIS_ID
System Log Message
Description
Type
408
Error: An error occurred
notice
ANY
An internal software failure occurred.
Contact your technical support representative.
Failed to copy from source-filename to destination-filename
A JUNOS process could not copy the indicated source file to the indicated destination
name or location.
Error: An error occurred
error
ANY
pathname: error-message
A JUNOS process could not obtain status information for the indicated file system.
Event: This message reports an event, not an error
error
ANY
Not enough space left on device pathname
A JUNOS process found that the indicated file system did not have the free space needed
for storing temporary files.
Event: This message reports an event, not an error
warning
ANY
function-name: invalid chassis ID chassis-id
A JUNOS process could not determine the hostname for the master Routing Engine on
a routing node in a routing matrix, because the indicated chassis ID provided for the
routing platform was invalid.
Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.