CHAPTER 74
RT System Log Messages
RT_FLOW_SESSION_CLOSE
System Log Message
Description
Type
Severity
Facility
RT_FLOW_SESSION_CREATE
System Log Message
Description
Type
Severity
Facility
RT_FLOW_SESSION_DENY
System Log Message
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
the Junos OS with enhanced services by the Packet Forwarding Engine as it processes
packets for security control in real time.
session closed reason: source-address/source-port->destination-address/destination-port
service-name
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32 packets-from-client(bytes-from-client)
packets-from-server(bytes-from-server) elapsed-time
A security session was closed.
Event: This message reports an event, not an error
info
LOG_PFE
session created source-address/source-port->destination-address/destination-port
service-name
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32
A security session was created.
Event: This message reports an event, not an error
info
LOG_PFE
session denied source-address/source-port->destination-address/destination-port
service-name protocol-id(icmp-type) policy-name source-zone-name
destination-zone-name
prefix. They are generated on routers running
RT
569