Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 160

System log messages reference
Table of Contents

Advertisement

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
ASP_SFW_NO_POLICY
System Log Message
Description
Type
Severity
Facility
ASP_SFW_NO_RULE_DROP
System Log Message
Description
Type
Severity
Facility
ASP_SFW_PING_DUPLICATED_SEQNO
System Log Message
Description
Type
96
The stateful firewall received the packet with the indicated characteristics, which was
not an IP packet. The packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
source-address -> destination-addressNo policy
The stateful firewall received packets with the indicated source and destination addresses.
There was no matching policy for the traffic.
Event: This message reports an event, not an error
critical
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics, because
the packet did not match and stateful firewall rules. In this case, the default action is to
discard the packet. The discarded packet contained the indicated information about its
protocol (numerical identifier and name), source (logical interface name, IP address,
and port number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the Internet Control Message Protocol (ICMP) echo
request packet with the indicated characteristics, because packet's sequence number
was the same as in a previous packet. The discarded packet contained the indicated
information about its protocol (numerical identifier and name), source (logical interface
name, IP address, and port number), and destination (IP address and port number).
Event: This message reports an event, not an error
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.3 - software

Table of Contents