Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 144

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
ASP_IDS_LIMIT_PKT_RATE_BY_PAIR
System Log Message
Description
Type
Severity
Facility
ASP_IDS_LIMIT_PKT_RATE_BY_SRC
System Log Message
Description
Type
Severity
Facility
ASP_IDS_NO_MEM_SHOW_CMD
System Log Message
Description
Type
Severity
80
Event: This message reports an event, not an error
notice
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics, because
the number of packets per second (aggregated over all monitored flows) exceeded the
intrusion detection services (IDS) limit configured by the 'packets' statement at the [edit
services ids rule <rule-name> term <term-name> then session-limit by-pair] hierarchy
level. The discarded packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics, because
the number of packets per second (aggregated over all monitored flows) exceeded the
intrusion detection services (IDS) limit configured by the 'packets' statement at the [edit
services ids rule <rule-name> term <term-name> then session-limit by-source] hierarchy
level. The discarded packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
Not enough memory for show command
Intrusion detection services (IDS) could not service a request to show information from
IDS tables, because not enough memory was available.
Error: An error occurred
critical
Copyright © 2010, Juniper Networks, Inc.