Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 373

Type
Severity
Facility
JCS_SWITCH_BANDWIDTH_CONFIG
System Log Message
Description
Type
Severity
Facility
JCS_SWITCH_COMMUNICATION_ERROR
System Log Message
Description
Type
Severity
Facility
JCS_SWITCH_COMMUNICATION_OK
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
info
LOG_DAEMON
Switch slot bandwidth value1 percent (value2 KBPS)
The indicated JCS Switch Module has changed the bandwidth configuration to the
specified value.
Event: This message reports an event, not an error
info
LOG_DAEMON
Switch slot communication error (error-message)
The JCS process (jcsd) could not send an SNMP request to the indicated Switch Module
because of the indicated error.
Error: An error occurred
error
LOG_DAEMON
Switch slot communication is OK
The JCS process (jcsd) has established a communication link with the indicated Switch
Module.
Event: This message reports an event, not an error
info
LOG_DAEMON
Chapter 39: JCS System Log Messages
309