Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 233

Type
Severity
Facility
Action
CHASSISD_HOST_TEMP_READ
System Log Message
Description
Type
Severity
Facility
CHASSISD_HSR_CONFIG_READ_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_HSR_CONFIG_WRITE_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_HSR_ELEMENTS_ERROR
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Increase cooling in the area around the chassis.
Error reading host temperature sensor
The chassis process (chassisd) could not read the temperature sensors on the routing
platform.
Error: An error occurred
notice
LOG_DAEMON
function-name: unable to read configuration for HSR identifier
The indicated function could not read the configuration for the indicated high-speed
receiver (HSR).
Error: An error occurred
error
LOG_DAEMON
function-name: unable to write configuration for HSR identifier
The indicated routine could not write to the configuration for the indicated high-speed
receiver (HSR).
Error: An error occurred
error
LOG_DAEMON
Provided number of HSR elements (count) was invalid
The indicated routine for processing a certain number of high-speed receiver (HSR)
elements failed, because the supplied number of elements was invalid.
Error: An error occurred
error
Chapter 18: CHASSISD System Log Messages
169