Chapter 25 Dynamic System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 25
DYNAMIC System Log Messages
DYNAMIC_VPN_AUTH_CONNECT_FAIL
System Log Message
Description
Type
Severity
Facility
DYNAMIC_VPN_AUTH_FAIL
System Log Message
Description
Type
Severity
Facility
DYNAMIC_VPN_AUTH_INVALID
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Access Manager client which is used in the dynamic VPN feature. The dynamic VPN
feature further simplifies remote access by enabling users to establish Internet Protocol
Security (IPsec) VPN tunnels without having to manually configure VPN settings on their
PCs or laptops. Instead, authenticated users can simply download the Access Manager
Web client to their computers. This Layer 3 remote access client uses client-side
configuration settings that it receives from the server to create and manage a secure
end-to-site VPN tunnel to the server.
Unable to connect to fwauthd on socket file-descriptor: error-message
The connection manager authentication process could not connect to fwauthd daemon
on the indicated socket.
Event: This message reports an event, not an error
error
LOG_AUTH
Username/password and token are username
The connection manager authentication process was unable to authenticate the indicated
user/token
Event: This message reports an event, not an error
error
LOG_AUTH
type username is invalid
The connection manager authentication failed due to invalid user/token
Event: This message reports an event, not an error
prefix. They are generated by the
DYNAMIC
243