Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 545

Severity
Facility
PPPD_CHAP_REPLAY_ATTACK_DETECTED
System Log Message
Description
Type
Severity
Facility
PPPD_EVLIB_CREATE_FAILURE
System Log Message
Description
Type
Severity
Facility
PPPD_LOCAL_CREATE_FAILED
System Log Message
Description
Type
Severity
Facility
PPPD_MEMORY_ALLOCATION_FAILURE
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
info
LOG_AUTH
interface-name: received operation with CHAP ID message-id, which is identical to an
outstanding challenge. Peer is trying to exhort response value.
During an exchange of authentication messages, a peer responded to a challenge message
from the Point-to-Point Protocol process (pppd) by returning the same message. The
pppd process did not respond to the peer, because doing so would provide the answer
to the original challenge. The peer must provide the answer on its own for authentication
to succeed.
Error: An error occurred
error
LOG_AUTH
Unable to create event context: error-message
The Point-to-Point Protocol process (pppd) could not create a context for handling
asynchronous events, for the indicated reason.
Error: An error occurred
error
LOG_AUTH
Unable to allocate LOCAL module handle: error-message
The Point-to-Point Protocol process (pppd) attempted to allocate a locally configured
'password' authentication module as part of its authentication sequence. The allocation
failed.
Error: An error occurred
error
LOG_AUTH
Unable to allocate memory for object object-name: error-message
The Point-to-Point Protocol process (pppd) could not allocate memory from the heap
for the indicated object.
Error: An error occurred
Chapter 69: PPPD System Log Messages
481