Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 712

Junos 10.3 System Log Messages Reference
UI_DBASE_RECREATE
System Log Message
Description
Type
Severity
Facility
UI_DBASE_REOPEN_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
UI_DUPLICATE_UID
System Log Message
Description
Type
Severity
Facility
Action
UI_FACTORY_OPERATION
System Log Message
Description
648
User 'username' attempting database re-creation
The management process (mgd) discovered that the version of JUNOS software running
on the routing platform does not match the version of the current configuration database.
In response to a prompt from mgd, the indicated user initiated a rebuilding of the database.
Event: This message reports an event, not an error
notice
ANY
Reopen of the database failed
After rebuilding the schema file for the configuration database, the management process
(mgd) closes the file and reopens it in read-only mode to prevent corruption. It could not
reopen the file.
Error: An error occurred
alert
ANY
An internal software failure occurred.
Contact your technical support representative.
Users username1 and username2 have the same UID uid
The JUNOS software allows multiple user login accounts to share the same UID. This
message was logged in case site policy dictates that users should not share UIDs.
Event: This message reports an event, not an error
notice
ANY
Assign different UIDs to the affected users.
Committing factory default configuration because CONFIG button was pressed and held
The management process (mgd) began a commit operation to activate the factory
default configuration, because the CONFIG button on the chassis was pressed and held
for 15 seconds or more.
Copyright © 2010, Juniper Networks, Inc.