Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 274

Junos 10.3 System Log Messages Reference
Facility
Cause
Action
CHASSISD_VOLTAGE_READ_FAILED
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_VOLTAGE_SENSOR_INIT
System Log Message
Description
Type
Severity
Facility
Action
210
LOG_DAEMON
Either a previous software upgrade did not complete successfully, or the chassisd process
or FRU did not restart after a successful software upgrade.
Upgrade the software and reboot the routing platform.
Unable to read voltage from fru-name (group group-id, address address, channel
voltage-channel)
The chassis process (chassisd) could not read voltage data from the indicated component
(field-replaceable unit, or FRU).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Unable to initialize voltage sensor for fru-name (group group-id, address address)
The chassis process (chassisd) could not initialize the voltage sensor for the indicated
component (field-replaceable unit, for FRU).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.