Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 581

Description
Type
Severity
Facility
RPD_KRT_IFD_GENERATION
System Log Message
Description
Type
Severity
Facility
Cause
RPD_KRT_IFL_CELL_RELAY_INV_MODE
System Log Message
Description
Type
Severity
Facility
RPD_KRT_IFL_CELL_RELAY_NO_MODE
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
The routing protocol process (rpd) received a message from the kernel that specified
the cell-relay encapsulation for the indicated physical interface, but not the cell-relay
mode.
Error: An error occurred
notice
LOG_DAEMON
ifd interface-device-index generation mismatch -- rpd rpd-generation kernel
kernel-generation
The routing protocol process (rpd) received a message from the kernel in which the
physical interface associated with the indicated numerical index differed from the
interface-to-index mapping maintained by rpd.
Event: This message reports an event, not an error
notice
LOG_DAEMON
It is possible that rpd discarded some interface messages from the kernel without
processing them because it received more messages than it could handle. It will recover.
Invalid mode (mode) specified for logical interface interface-name; defaulting to port
mode
The routing protocol process (rpd) received a message from the kernel that specified
the cell-relay encapsulation for the indicated logical interface, but the specified cell-relay
mode (port, virtual-circuit, or virtual-path) was invalid.
Error: An error occurred
notice
LOG_DAEMON
No mode specified for logical interface interface-name; defaulting to port mode
The routing protocol process (rpd) received a message from the kernel that specified
the cell-relay encapsulation for the indicated logical interface but not the cell-relay mode.
Error: An error occurred
notice
LOG_DAEMON
Chapter 73: RPD System Log Messages
517