Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 217

Description
Type
Severity
Facility
CHASSISD_FM_BAD_STATE
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR_CLOS_F13_HSR
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
The chassis process (chassisd) could not open the indicated file because it could not
obtain its status.
Error: An error occurred
error
LOG_DAEMON
function-name: unexpected state statetype for SIB#sib-slot
The indicated function failed because it encountered the indicated type of unexpected
internal state with respect to the indicated Switch Interface Board (SIB).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: error-message (SIB#sib-slot, Packet Forwarding Engine pfe on FPC
fpc-slot)
During execution of the indicated fabric management routine, the indicated error occurred
between the indicated Switch Interface Board (SIB) and the indicated Packet Forwarding
Engine on the indicated Flexible PIC Concentrator (FPC).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
FM: error-message errors occurred on link from F2-f2-sib_SFfrom-fchip_s-port to
F13SIBto-sfc-sib_SF3_to-fchip_d-port on plane sib-plane
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the SFC routing node detected an error in the electrical
path between the indicated port on the indicated F2SIB and F13SIB on the indicated
plane.
Error: An error occurred
Chapter 18: CHASSISD System Log Messages
153