Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 594

Junos 10.3 System Log Messages Reference
RPD_MC_CFG_CREATE_ENTRY_FAILED
System Log Message
Description
Type
Severity
Facility
Action
RPD_MC_CFG_FWDCACHE_CONFLICT
System Log Message
Description
Type
Severity
Facility
RPD_MC_CFG_PREFIX_LEN_SHORT
System Log Message
Description
Type
Severity
Facility
RPD_MC_COSD_WRITE_ERROR
System Log Message
Description
Type
Severity
Facility
Action
530
Could not create entry for entry.
The multicast configuration request failed because the routing protocol process (rpd)
failed to create the specified configuration entry.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Multicast forwarding-cache: reuse value must be less than or equal to suppress value
Multicast forwarding-cache reuse value is configured greater than the suppress value.
Reuse value must be less than or equal to the suppress value.
Event: This message reports an event, not an error
warning
ANY
Multicast argument: prefix length prefix-length is too short for prefix route-prefix, ignoring
excess host bits
The prefix length for the indicated prefix is too short and it has a non-zero host portion.
Excess host bits will be ignored.
Event: This message reports an event, not an error
warning
ANY
Unable to write to pipe to COS process: (error-message)
The routing protocol process (rpd) could not write a message on the write pipe to the
Class Of Service process (cosd).
Error: An error occurred
info
LOG_DAEMON
Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.