Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
RPD_DYN_CFG_SES_RECOVERY_FAILED
System Log Message
Description
Type
Severity
Facility
Action
RPD_DYN_CFG_SET_CONTEXT_FAILED
System Log Message
Description
Type
Severity
Facility
RPD_ESIS_ADJDOWN
System Log Message
Description
Type
Severity
Facility
Cause
RPD_ESIS_ADJUP
System Log Message
506
The routing protocol process (rpd) tried to open the session database and failed.
Error: An error occurred
info
LOG_DAEMON
Recovery of session client-session-id failed
The routing protcol process (rpd) tried to recover a session and failed.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Set dynamic config context for profile profile-name session client-session-id failed
The routing protocol process (rpd) tried to set up the dynamic configuration context and
failed.
Error: An error occurred
error
LOG_DAEMON
ES-IS lost adjacency-type adjacency to neighbor-nsap-netn on interface-name, reason:
reason
An ES-IS adjacency with the indicated neighboring router was terminated. The local
router no longer exchanges routing information with, or directs traffic to, the neighboring
router.
Event: This message reports an event, not an error
notice
LOG_DAEMON
The communication path to the neighboring router was disrupted, a protocol error
occurred, or the neighboring router was powered down.
ES-IS new adjacency-type adjacency to neighbor-nsap-netn on interface-name
Copyright © 2010, Juniper Networks, Inc.