Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 323

EVENTD_PIPE_CREATION_FAILED
System Log Message
Description
Type
Severity
Facility
EVENTD_POLICY_ACTION_FAILED
System Log Message
Description
Type
Severity
Facility
EVENTD_POLICY_LIMIT_EXCEEDED
System Log Message
Description
Type
Severity
Facility
EVENTD_POLICY_UPLOAD_FAILED
System Log Message
Description
Type
Severity
Facility
EVENTD_POPEN_FAIL
System Log Message
Copyright © 2010, Juniper Networks, Inc.
Unable to create pipe: error-message
The event processing process (eventd) could not create a pipe for interprocess
communication.
Error: An error occurred
error
LOG_DAEMON
Unable to execute 'action' action in policy policy-name
The event processing process (eventd) could not perform the indicated action, which is
specified by the indicated policy.
Error: An error occurred
error
LOG_DAEMON
Unable to execute policy 'policy-name' because current number of policies (count)
exceeds system limit (limit)
The event processing process (eventd) could not execute the indicated policy, because
the indicated number of currently executing policies exceeded the indicated maximum
defined by the system.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Unable to upload file 'filename' to destination 'destination-name' for policy 'policy-name'
The event processing process (eventd) could not upload the indicated file to the indicated
destination.
Error: An error occurred
error
LOG_DAEMON
Error error-code in invoking command 'command'
Chapter 27: EVENTD System Log Messages
259