Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 199

Facility
Action
CHASSISD_BLOWERS_SPEED
System Log Message
Description
Type
Severity
Facility
CHASSISD_BLOWERS_SPEED_FULL
System Log Message
Description
Type
Severity
Facility
CHASSISD_BLOWERS_SPEED_MEDIUM
System Log Message
Description
Type
Severity
Facility
CHASSISD_BUS_DEVICE_OPEN_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
Copyright © 2010, Juniper Networks, Inc.
LOG_DAEMON
Contact your technical support representative.
Fans and impellers are now running at normal speed
The fans (and impellers, if applicable) were running at the normal speed.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Fans and impellers being set to full speed [reason]
For the indicated reason, the chassis process (chassisd) increased the speed of fans
(and impellers, if applicable) to the maximum.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Fans and impellers being set to intermediate speed
The chassis process (chassisd) increased the speed of fans (and impellers, if applicable)
to the intermediate level because of a temperature increase in the chassis.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Unable to open 'bus-type' bus device, error error-message (error-code)
The chassis process (chassisd) could not open the indicated bus device for the indicated
reason.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Chapter 18: CHASSISD System Log Messages
135