Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 427

Type
Severity
Facility
Action
L2CPD_RUNTIME_MODULE
System Log Message
Description
Type
Severity
Facility
Cause
L2CPD_RUNTIME_OPERATION
System Log Message
Description
Type
Severity
Facility
Cause
L2CPD_RUNTIME_TASK
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: runtime was excessive (time) during action of module
The indicated operation on the indicated submodule of the Layer 2 Control Protocol
process (l2cpd) ran uninterrupted for the indicated period of time, which is considered
excessive.
Event: This message reports an event, not an error
warning
LOG_DAEMON
The message was logged because task accounting is enabled. The function might be
implemented inefficiently.
function-name: runtime was excessive (time) during action of module
The indicated operation on the indicated submodule of the Layer 2 Control Protocol
process (l2cpd) ran uninterrupted for the indicated period of time, which is considered
excessive.
Event: This message reports an event, not an error
warning
LOG_DAEMON
The message was logged because task accounting is enabled. The function might be
implemented inefficiently.
function-name: runtime was excessive (total-time [user-time user, system-time system])
doing action
While performing the indicated operation, the indicated function in the Layer 2 Control
Protocol process (l2cpd) ran uninterrupted for the indicated period of time (the sum of
the indicated user and system times), which is considered excessive.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Chapter 45: L2CPD System Log Messages
363