Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 713

Type
Severity
Facility
UI_INITIALSETUP_OPERATION
System Log Message
Description
Type
Severity
Facility
UI_INVALID_REMOTE_PERMISSION
System Log Message
Description
Type
Severity
Facility
UI_JUNOSCRIPT_CMD
System Log Message
Description
Type
Severity
Facility
UI_JUNOSCRIPT_ERROR
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
notice
LOG_AUTH
Committing EZsetup configuration as EZsetup option is chosen
The management process (mgd) began a commit operation to activate the pre initial
setup configuration, because the initial-setup option was selected from the LCD Menu.
Event: This message reports an event, not an error
notice
LOG_AUTH
invalid permissions from authorization server: permission-name
RADIUS and TACACS+ authorization servers use Juniper Networks vendor-specific
attributes (VSAs) to specify user permissions. A VSA included the indicated permission
name, which is invalid.
Error: An error occurred
error
ANY
User 'username' used JUNOScript client to run command 'command'
The indicated user ran the indicated command using the JUNOS XML management
protocol.
Event: This message reports an event, not an error
info
LOG_AUTH
JUNOScript error: error-message
The management process (mgd) normally sends an error message to the JUNOS CLI or
JUNOScript API client in an <xnm:error> tag. It could not send the tag, so it sent the
indicated error message in an XML comment instead.
Error: An error occurred
warning
Chapter 88: UI System Log Messages
649