Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 669

Type
Severity
Facility
SNMPD_SEND_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_SET_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_SMOID_GEN_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
notice
LOG_DAEMON
function-name: send type (index1) failure: error-message
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
send either a protocol data unit (PDU) to the User Datagram Protocol (UDP) or a message
to a subagent.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Snmp set failed: error-message
Configuration data was changed using an Simple Network Management Protocol (SNMP)
Set request, but the SNMP agent process (snmpd) could not save the changes to the
configuration database.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Unable to generate OID from product-name (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a value for the self-monitoring object identifier (OID) of the indicated product.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Chapter 82: SNMPD System Log Messages
605