Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 674

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
SNMPD_USER_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
Action
610
The Simple Network Management Protocol (SNMP) agent process (snmpd) generated
a warm-start trap when it initialized (other Routing Engine processes were already active).
Event: This message reports an event, not an error
error
LOG_DAEMON
function-name: error in action user 'username' auth 'authentication-type' priv 'privilege-type'
The indicated operation (creation, installation, or deletion) failed during configuration
of the indicated user.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.