Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 391

Description
Type
Severity
Facility
KMD_DPD_FAILOVER_NO_BACKUP_PEER
System Log Message
Description
Type
Severity
Facility
KMD_DPD_FAILOVER_NO_TUNNEL_CFG
System Log Message
Description
Type
Severity
Facility
KMD_DPD_IKE_SERVER_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
KMD_DPD_INVALID_ADDRESS
System Log Message
Copyright © 2010, Juniper Networks, Inc.
An IP Security (IPSec) tunnel normally fails over to its backup when the key management
process (kmd) detects a dead peer. Failover was not attempted because the configuration
for the indicated tunnel does not include information about an active peer.
Error: An error occurred
error
LOG_AUTH
Tunnel tunnel-name did not fail over: no backup peer configured
An IP Security (IPSec) tunnel normally fails over to its backup when the key management
process (kmd) detects a dead peer. A failover attempt failed when the kmd process
found that the configuration for the indicated tunnel does not include information about
a backup peer.
Error: An error occurred
error
LOG_AUTH
Tunnel did not fail over: tunnel configuration not found
An IP Security (IPSec) tunnel normally fails over to its backup when the key management
process (kmd) detects a dead peer. Failover was not attempted because there was no
configuration information for the tunnel.
Error: An error occurred
error
LOG_AUTH
Unable to send DPD reply to remote peer remote-address:remote-port: no IKE server
instance for local peer local-address:local-port
The key management process (kmd) could not retrieve the Internet Key Exchange (IKE)
server instance referenced by the indicated local peer (address and port), so it could not
reply to the indicated remote peer (address and port) from the local peer.
Error: An error occurred
error
LOG_AUTH
Unable to send DPD reply: local peer local-address; remote peer remote-address
Chapter 43: KMD System Log Messages
327