Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 285

Type
Severity
Facility
Action
COSD_NULL_INPUT_ARGUMENT
System Log Message
Description
Type
Severity
Facility
Action
COSD_OUT_OF_DEDICATED_QUEUES
System Log Message
Description
Type
Severity
Facility
COSD_RATE_LIMIT_INVALID
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
warning
LOG_DAEMON
Correct the configuration so that the multilink class setting in the fragmentation map
does not exceed the class limit for the interface.
NULL input argument : error-message
The pointer that was passed to this function was NULL.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Queue usage count for interface interface-name is at percentage-value percent
The class-of-service (CoS) process (cosd) is running out of dedicated queues.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Unable to apply scheduler map scheduler-map to interface interface-name because it
does not support either configured number of rate limiting queues or rate limited queue
priority or rate limited queues and buffer size
The class-of-service (CoS) process (cosd) did not apply the indicated scheduler map
to the indicated interface, because the number of rate limited queues in the scheduler
map exceeded the limit supported by this interface or the priority is not supported. The
interface is housed in a type of PIC that does not support the number of configured rate
limited queues or the priority is not supported. In terms of configuration, the 'rate-limit'
statement is included in the scheduler definition at the [edit class-of-service schedulers
<scheduler-name> transmit-rate <rate> | percent <percentage>] hierarchy level. The
scheduler is included in the scheduler map applied to the interface.
Error: An error occurred
error
LOG_DAEMON
Chapter 20: COSD System Log Messages
221