Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 287

Type
Severity
Facility
Action
COSD_SCHEDULER_MAP_CONFLICT
System Log Message
Description
Type
Severity
Facility
Action
COSD_SCHED_AVG_CONST_UNSUPPORTED
System Log Message
Description
Type
Severity
Facility
Action
COSD_SCHED_MAP_GROUP_CONFLICT
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
output shaping rate should be configured on the interface. Since no output shaping rate
is configured, the transmit rate or shaping rate of the parent interface will be used instead.
Error: An error occurred
warning
LOG_DAEMON
Configure output shaping rate for the indicataed interface
Forwarding classes "first-forwarding-class" and "second-forwarding-class" in scheduler
map scheduler-map both map to queue queue-number
Both of the indicated forwarding classes, which are defined in the indicated scheduler
map, map to the same indicated queue. The double mapping is invalid.
Error: An error occurred
error
LOG_DAEMON
Map only one forwarding class to the queue.
Averaging constant not supported on interface interface-name. Value set in scheduler-map
scheduler-map (scheduler name) will be ignored.
Configuring averaging constant is not supported on the indicated interface. Value set in
the indicated scheduler will be ignored.
Error: An error occurred
warning
LOG_DAEMON
Remove the averaging-constant configuration from the indicated scheduler.
Interface interface-name cannot be bound to scheduler-map scheduler-map. It will be
bound to default scheduler-map
Interfaces belonging to a group cannot be bound to different scheduler maps. They will
be bound to the default scheduler map.
Error: An error occurred
error
Chapter 20: COSD System Log Messages
223