FujiFilm FN-PS551 Service Manual page 94

Maintenance 7. Service Utility
(5) Enter model information in the [model:] and [manufacturer:] field.
NOTE
• Both of the [model:] (manufacturer's model name) and [manufacturer:]
(manufacturer name) must be no more than 64 characters long.
(Characters must be selected from the table in " [Name] Window" above).
• Normally the default for the model and manufacturer names should be
used ("FN-PS551" and "FUJI PHOTO FILM CO., LTD" respectively). Where
multiple FN-PS551 systems are installed at a single location, each must
be identified by a unique name determined in consultation with the users.
• When two printers are connected, the model information can be the same
for both.
• For DICOM protocol connections, this name is used by the DICOM "Printer
Name Acquisition".
(6) For software ver. A00, click the [Sorting] tab.
NOTE
For software ver. A02 or later, proceed to the step (8).
→ The [Sorting] window appears.
006-251-04
07.24.2000 FM2824
Maintenance-73
FN-PS551 Service Manual Maintenance-73