Setting The Language For Fn-Ps551 Application - FujiFilm FN-PS551 Service Manual

Installation

8. Setting the Language for FN-PS551 Application

8. Setting the Language for FN-PS551 Application
To change the representative language for the FN-PS551 application to one other than
English (United States) that is a factory default, follow the procedure shown below.
NOTE
• If the representative language is not changed, the procedure described in
this section is omitted.
• Select from the eight languages listed below. Other languages are not
supported.
English (United States), French (Standard or France), German (Standard
or Germany), Italian (Standard or Italy), Norwegian (Bokmal), Swedish,
Spanish (Modern Sort or Spain), Danish.
(1) Set the representative language for the FN-PS551 Application according to
the OS type of the control unit to be used (Windows NT / Windows XP)
referring to the appropriate procedure shown below.
• For Windows NT
"8.9 Setting the Language for FN-PS551 Application" in "MAINTENANCE"
• For Windows XP
"11.6 Setting the Language for FN-PS551 Application" in "MAINTENANCE"
(2) After completing setting of the representative language for the FN-PS551
Application, switch off the power to the control unit, referring to the appropriate
procedure shown below.
• For Windows NT
"
"INSTALLATION 7. Saving Settings"
• For Windows XP
"
"INSTALLATION 7. Saving Settings"
006-251-07
10.28.2002 FM3487
Switch off the power to the control unit (for Windows NT)" in
Switch off the power to the control unit (for Windows XP)" in
Installation-62
FN-PS551 Service Manual Installation-62