Installation
1. Installing Conditions
1.6
Space Requirements for Installation and Maintenance
For installation
• A clearance of at least 10 cm behind the control unit and monitor should be
provided for ventilation.
• The system can be operated with monitor, keyboard, and mouse disconnected.
If using this configuration, space only for the control unit should be provided.
Even with this configuration, a clearance of at least 10 cm behind the control
is needed.
• The control unit can also be mounted vertically (i.e., as a mini-tower) using
the floor stand.
For maintenance
• In addition to the space requirements set forth in the "
aforementioned, sufficient space should be provided to allow a service
engineer to operate the keyboard or mouse while observing system status
on the screen.
1.7
Network Connections
To connect this unit to a network, prepare the necessary network parts and accessories
and perform the preliminary installation work. Fuji does not provide network parts and
accessories as part of its normal product range. These should be prepared taking the
operating environment into consideration.
006-251-01
05.12.99 FM2442
Installation-7
For installation"
FN-PS551 Service Manual Installation-7