FujiFilm FN-PS551 Service Manual page 371

Installation 4. OS Settings
(4) Select the [Specify an IP address] option on the [IP Address] window. Enter
the following information in the [IP Address:] , [Subnet Mask:] , and [Default
Gateway:] boxes. And then click [OK] .
• Enter the IP address of this FN-PS551 in [IP Address:] box.
• Enter the mask data in [Subnet Mask:] box if the network uses a subnet.
If the network does not use a subnet, enter the Class C mask data
("255.255.255.0").
• Enter the IP address for the router (gateway) to which this FN-PS551 is
connected in [Default Gateway:]box if image data from clients connecting to
different network is received.
NOTE
• Confirm details such as IP address, subnet mask, and router with the
network administrator of the installation site.
• The setting process cannot be termined until a subnet mask has been
entered.
• [Default gateway:] box need not be entered unless image data is received
from different networks.
• The [IP Address] tab display example illustrated below shows the case for
a DELL OptiPlex GX1 series control unit model. If the control unit model is
different, different [Adapter] name is displayed.
006-251-07
10.28.2002 FM3487
Installation-45
FN-PS551 Service Manual Installation-45