FujiFilm FN-PS551 Service Manual page 64

Maintenance 7. Service Utility
[3] → Clients
[4] → Modality Setup
[5] → Annotation
[6] → Logging
[7] → Sorting
006-251-05
05.30.2001 FM3069
Lists all clients (image diagnostic systems or FCR systems) connected to the
FN-PS551 via network.
name Specify client ID information.
protocol Specify the protocol for connection to the client.
DICOM
TOSHIBA
DICOM default
FINP
magnify
procedure : A-VR
procedure : SSM
LUT (DICOM)
procedure : SAR
procedure : BAR
LUT (TOSHIBA)
Click [Setup...] from [modality] option, then go to → [4] Modality Setup
procedure : SAR
procedure : BAR
printer
Specify client-dependent default values for the output printer
(fixed, primary/secondary, random).
output format
Specify client-dependent default values for the output format.
(for [output format1] and [output format2], if software ver. A05 or later is used)
Specify tone correction processing parameters for each modality
(required for TOSHIBA protocol only).
Add Modality Entry Lists modalities that can be registered.
LUT Specify tone correction processing method and associated parameters.
procedure : SAR
procedure : BAR
Specify annotation text to appear on output film,
and film output format related settings for IPU function.
Print Server Specify annotation text and margin between images to print out
images received through DICOM and TOSHIBA protocols.
(Specification of [a margin between images] is changed to
[output format2] of [Clients] if software ver. A05 or later is used)
IPU 1 to 15 Specify film output format related settings to print out images
IPU 16 to 26 (CR images) received through IPU function.
IPU 27 to 34 (Available with software ver. A03 or later although it appears
IPU 35 to 39 even with software ver. A02 or later)
Specify log data acquisition and other settings.
Specify sort conditions (When applicable).
To set a new DICOM protocol client.
To set a new TOSHIBA protocol client.
To use the DICOM defaults.
To set a new FUJI protocol (FINP) client.
(Available with software ver. A03 or later although
it appears even with software ver.A02 or later)
Specify the enlargement/reduction processing method
and associated parameters.
A-VR method
SSM method
Specify the tone correction processing method and associated
parameters (DICOM).
SAR method
BAR method
Specify the tone correction processing method and associated
parameters (TOSHIBA).
SAR method
BAR method
SAR method
BAR method
FN-PS551 Service Manual Maintenance-47
Maintenance-47
FP4F0303.EPS