Table of Contents
Advertisement
Maintenance 10. Installing Software for GX150 Series Control Unit
(18) When [Setup needs to copy some Windows NT files.] is displayed, replace
the CD-ROM with the "Reinstallation CD" that was used in " Installing
Windows NT".
Then, the [Windows NT CD-ROM] window is displayed, click close box
close the window.
(19) Type "E:\i386" (E is the drive letter of the CD-ROM, which may vary
according to the environment) in the blank field, then click [Continue].
(20) When the [TCP/IP Setup] alert for checking whether DHCP server is used is
displayed, click [No].
(21) When the [Microsoft TCP/IP Properties] dialog is displayed, enter necessary
information including the [IP Address], [Subnet Mask] and [Default Gateway]
in the setting items of the IP Address tab, then click [OK].
• [Specify an IP address] option should be selected.
• Enter an IP address for this FN-PS551 in the [IP Address].
• If the network is using a subnet, enter mask data in the [Subnet Mask].
• For [Default Gateway], before receiving image data from clients
NOTE
• Confirm details such as IP addresses, subnet masks, and routers with the
network administrator of the installation site.
• The setting process cannot be ended until a subnet mask has been entered.
• The [Default Gateway] need not be entered unless image data is received
from different networks.
(22) When [You may use this page to disable network bindings or arrange the
order in which this computer finds information on the network.] is displayed,
click [Next].
(23) When [Windows NT is now ready to start the network so that you can complete
the installation of networking.] is displayed, click [Next].
(24) Check that the host name set at " Installing Windows NT" is displayed in
[Computer Name], then click [Next].
(25) When [Networking has been installed on this computer.] is displayed, click
[Finish].
(26) When [Do you want to restart your computer now?] is displayed, remove the
CD-ROM from the drive, then click [Yes].
(27) The system restarts, so perform the common restarting procedure for installing
the various types of drivers.
006-251-06
12.18.2001 FM3271
If the network is not using a subnet, enter the Class C mask data
(255.255.255.0).
(modalities) connecting to different networks, enter an IP address for
the router (gateway) to which this FN-PS551 is connected.
Maintenance-276
FN-PS551 Service Manual Maintenance-276
to
Advertisement
Chapters
Table of Contents
