Connecting Cables - FujiFilm FN-PS551 Service Manual

Installation 2. Setting Up the Equipment
2.7

Connecting Cables

NOTE
A maximum of two E-I/F boards can be connected. The illustration shown
below is a reference to indicate the connection location. However, for DELL
OptiPlex GX110/GX150/GX260 series control unit models, a DXA01A board
can not be used.
• Layout on the control main unit rear panel
(For DELL OptiPlex GX1/GX110 series control unit models)
• Layout on the control main unit rear panel
(For a DELL OptiPlex GX150 series control unit model)
006-251-07
10.28.2002 FM3487
Mouse connector
Voltage
selector switch
AC power
Keyboard connector
connector
NIC connector
Mouse connector
Keyboard connector
First DXA board / First PEI board
Second DXA board/
Second PEI board (for GX110 series)
Monitor connector
First PEI board
Monitor connector
AC power connector
FN-PS551 Service Manual Installation-27
Installation-27
Second PEI board
(for GX1 series)
NIC connector
FP4B0010.EPS
Second PEI board
Voltage selector switch
FP4B0083.EPS