FujiFilm FN-PS551 Service Manual page 62

Maintenance 7. Service Utility
[3] → Clients
[4] → Modality Setup
[5] → Annotation
[6] → Logging
006-251-03
03.30.2000 FM2730
Lists all clients (image diagnostic systems) connected to the FN-PS551 via network.
name Specify client ID information.
protocol Specify the protocol for connection to the client.
DICOM
TOSHIBA
DICOM default
magnify
procedure : A-VR
procedure : SSM
LUT (DICOM)
procedure : SAR
procedure : BAR
LUT (TOSHIBA)
Click [Setup...] from [modality] option, then go to → [4] Modality Setup
procedure : SAR
procedure : BAR
printer
Specify client-dependent default values for the output printer
(fixed, primary/secondary, random).
output format
Specify client-dependent default values for the output format.
Specify tone correction processing parameters for each modality
(required for TOSHIBA protocol only).
Add Modality Entry Lists modalities that can be registered.
LUT Specify tone correction processing method and associated parameters.
procedure : SAR
procedure : BAR
Specify annotation text to appear on output film and the
margin between images.
Annotation Box display
Font
Specify log data acquisition and other settings.
To set a new DICOM protocol client.
To set a new TOSHIBA protocol client.
To use the DICOM defaults.
Specify the enlargement/reduction processing method
and associated parameters.
A-VR method
SSM method
Specify the tone correction processing method and associated
parameters (DICOM).
SAR method
BAR method
Specify the tone correction processing method and associated
parameters (TOSHIBA).
SAR method
BAR method
SAR method
BAR method
Input annotation text.
Specify the font of the annotation text.
FN-PS551 Service Manual Maintenance-45
Maintenance-45
FP4F0016.EPS
FP4F0017.EPS