Table of Contents
Advertisement
Maintenance 9. Setting the Control Unit (PC) to Use PEI01A Board
(12) Click [OK].
→ The [Card Resource Usage] dialog appears.
(13) Click [Close].
→ Returns to the [ISA Configuration Utility] window. The names of the set boards
("DXA#1" and "DXA#2") are added in the [Card Configured In System:] list.
(14) Repeat the steps (4) to (13) and set the second DXA board in the similar
procedure.
→ When the setting of the first and second DXA board are completed, the [Card
Configured In System:] list of the [ISA Configuration Utility] window appears as
below.
006-251-05
05.30.2001 FM3069
Maintenance-258
FN-PS551 Service Manual Maintenance-258
Advertisement
Chapters
Table of Contents
